fbpx

ZVA-213UWX+

Ultra-Wideband Amplifier, 0.1 to 20 GHz

Description

Product Overview Mini-Circuits’ ZVA-213UWX+ is a coaxial, ultra-wideband amplifier offering very flat gain and high dynamic range from 0.1 to 20 GHz. This model is capable of delivering up to +16 dBm output power at 1 dB compression with 2 dB noise and +30 dBm IP3 supporting a wide range of sensitive, high-dynamic range receiver applications and many systems where high performance over a wide frequency range is needed. It operates on a +12/-5V supply and features built-in safety features including protection against reverse bias and immunity to accidental open or short loads. The amplifier comes in a rugged, compact case (1.3 x 0.98 x 0.56″) with 2.92mm connectors. The Big Deal Flat Gain, 14.75 ±1.25 dB across entire bandwidth Low noise figure, 2 dB, typ High IP3, +30 dBm Case Style: RN2486-1 Wideband Amplifier Coaxial ZVA-213UWX+ 50 0.1 to 20 GHz

Features

• Low noise figure, 1.9 dB at 8 GHz • High IP3, 30 dBm typ. at 8 GHz • Excellent gain flatness, ± 1.0 from 0.1 GHz to 20 GHz • Fully compatible with SMA, Super SMA, and 3.5mm connectors

Related Products

Other products of interest

Transformers

ADT3-1T-75+

Product Overview Mini-Circuits’ ANNE-50E+ is an ultra-wideband 50 termination capable of absorbing signals up to 1W from DC to 65

Read More »
Splitter/Combiner

ZC8SC272-12DL+

Coaxial, Dual-Channel • 8 Way-0° Power Splitter/Combiner • 1 to 100 MHz, 2450 to 2700 MHz • Distributes IF and

Read More »
Multipliers

CY2-283+

Product Overview Mini-Circuits’ CY2-283+ is an ultra-wideband MMIC frequency doubler, converting input frequencies from 3.5 to 14 GHz into output

Read More »
Transformers

TCM2-33X+

Mini-Circuits’ TCW1-272+ is a tiny ceramic RF balun transformer with an impedance ratio of 1:1, covering a variety of wireless

Read More »
Amplifiers

TSY-13LNB+

Product Overview TSY-13LNB+ (RoHS compliant) is an advanced Low Voltage, Low Current, Low Noise wideband Bypass amplifier fabricated using GaAs

Read More »

Not sure which model you need?