fbpx

ZCDC13-K0144+

DIR COUP 2.92MM-F 1-40GHZ

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 2
The Big Deal
Precision Machining and Plating
Outstanding Return Loss
Super-High Rejection & Fast Roll-Off
Bandpass Filters
50 Frequency Bands from: 27 to 86 GHz
WVBP Series
Waveguide
About Virginia Diodes, Inc.
Virginia Diodes, Inc. develops and manufactures devices, components and systems for the millimeter-wave and terahertz frequency bands. This
includes direct detectors, frequency mixers and multipliers, receiver systems, and sources operating to frequencies as high as five terahertz. Test and
Measurement products include frequency extenders for the range from 26 GHz to 1.5 THz for Vector Network Analyzers, Spectrum Analyzers and
Signal Generators. VDI also offers select passive components, including high frequency waveguide filters, which have been developed to enable high-
quality measurement systems throughout this emerging frequency band.
20 30 40 50 60 70 80 90
WVBP-283-WR28+
WVBP-383-WR28+
WVBP-613-WR15+
WVBP-673-WR12+
WVBP-733-WR12+
WVBP-783-WR12+
WVBP-833-WR12+
Frequency (GHz)
Wave Guide Filter Bandpass Models

Features

 

Other products of interest

Couplers

DDCH-50-521+

DDCH-50-521+ Mini-Circuits’ DDCH-50-521+ surface-mount, high-power, dual-directional coupler provides 50 dB coupling on the through path and reflected path with very high power handling up to 300W for a wide variety of applications from 20 to 520 MHz.   This model provides low insertion loss of 0.07 dB, 35 dB return loss
Read More »
Bias-tee\Diplexer

DPLB-8510A04+

DPLB-8510A04+ DPLB-8510A04+ is a Low cost diplexer with the lowpass port at 5-85 MHz and highpass port at 102-1220 MHz. Good return loss combined with high out of channel rejection makes it an ideal part in cable TV and multiband radio systems. Features • Low insertion loss •  75Ω Impedance
Read More »
Power Splitters/RF Power Combiners

ZN6PD-02183-S+

ZN6PD-02183-S+ Mini-Circuits’ ZN6PD-02183+ is a 6way 0˚ ultra-wideband splitter/combiner supporting a wide range of applications from 2 to 18 GHz. This model is capable of handling up to 25W RF input power as a splitter with low insertion loss across its full frequency range, providing excellent signal power transmission from
Read More »
Filters

XLF-172H+

XLF-172H+ Mini-Circuits’ X-Series of reflectionless filters now includes 2- and 3-section models, giving you ultra-high rejection in the stopband – up to 50 dB! Reflectionless filters employ a patented filter topology which absorbs and terminates stopband signals internally rather than reflecting them back to the source. This new capability enables
Read More »
Cables

SLC-3FT-SMSM+

SLC-3FT-SMSM+ Mini-Circuits’ X-Series reflectionless filters employ a novel filter topology which absorbs and terminates stop band signals internally rather than reflecting them back to the source. This new capability enables unique applications for filter circuits beyond those suited to traditional approaches. Traditional filters are reflective in the stop band, sending
Read More »

086-8SMPR+

086-8SMPR+ Product Overview 086-SMPR+ Series Hand-Flex interconnect cables are ideal for interconnecting coaxial components and subassemblies in a wide range of systems. Rugged, hand-formable cable construction provides a minimum bend radius of 6mm to accommodate tight layouts without the need for bending tools, adapters or brackets. Right-angle SMP-F blind mate snap-on connectors
Read More »

not sure which model you need?