fbpx

WVBP-613-WR15+

BPF 61.5 GHZ / WAVEGUIDE /RoHS

Product Overview
TSS-23HLN+ (RoHS compliant) is an advanced wideband amplifier with shutdown feature. It is fabricated
using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and
with low noise figure. In addition, the TSS-23HLN+ has good input and output return loss over a broad
frequency range. TSS-23HLN+ is enclosed in a 3mm x 3mm, 12-lead MCLP package and has very good
thermal performance.

Features

 

Other products of interest

Filters

LFCN-8440+

LFCN-8440+ Mini-Circuits’ LFCN-8440+ is an LTCC low pass filter with a passband from DC to 8440 MHz, supporting a variety of applications. This model provides 1.3 dB passband insertion loss and 30 dB typical stopband rejection. It handles up to 8W RF input power and provides a wide operating temperature range
Read More »
Attenuators

RUDAT-6000-60

RUDAT-6000-60 Mini-Circuits’ RUDAT-6000-60 is a general purpose, single channel programmable attenuator suitable for a wide range of signal level control applications from 1 MHz to 6 GHz. The Attenuator provides 0 to 60 dB attenuation in 0.25 dB steps. Its unique design maintains linear attenuation change per dB, even at the highest
Read More »
All

ZX95-1200WR-S+

ZX95-1200WR-S+ The ZX95-1200WR-S+ is a Voltage Controlled Oscillator, designed to operate from 612 to 1200 MHz for cellular applications. The ZX95-1200WR-S+ is built using Mini-Circuits proven unibody construction (size of 1.20" x .75" x .46") which integrates the RF connectors with the case body to shield against unwanted signals and noise.
Read More »
Splitter/Combiner

SYPS-2-22HP+

SYPS-2-22HP+ Mini-Circuits’ SYPS-2-22HP+ is a surface-mount 2-way 0˚ splitter/combiner covering the 2 to 200 MHz frequency range, supporting bandwidth requirements for a wide range of RF/microwave systems. This model can handle up to 5W RF input power as a splitter and provides low insertion loss, high isolation, low amplitude unbalance, and low phase
Read More »
Attenuators

YAT-XX-D+ SERIES

YAT-XX-D+ SERIES Product Overview YAT-D-series MMIC attenuator dice (RoHS compliant) are fixed value, absorptive attenuators fabricated using highly repetitive MMIC processing with thin film resistors on Silicon substrates. They contain throughwafer Cu metallization vias to realize low thermal resistance and very wideband operation. YAT attenuator dice are available from stock
Read More »
Kits

PWR-6LGHS

PWR-6LGHS Product Overview The Mini-Circuits PWR-6LGHS Smart Power Sensor is a pocket-sized, 4.95” x 1.74” x 1.08”, precision test USB HID device (no driver installation required) that turns a Windows® or Linux® PC into a power meter. All specifications provided in the data sheet apply to continuous wave (CW) signals. Each unit
Read More »

not sure which model you need?