High Dynamic Range MMIC Amplifier, 30 MHz to 2.7 GHz


Product Overview The PHA-202+ (RoHS compliant) is a medium power amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-202+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. It has repeatable performance from lot to lot and is enclosed in a 5mm x 6mm, 8 lead package for very good thermal performance. Feature Advantages Broad Band: 0.03 to 2.7 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE Extremely High IP3 Versus DC power Consumption 46 dBm typical at 1.0 GHz The PHA-202+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 14-23 dB above the P1dB point. This feature makes this amplifier ideal for use in: Driver amplifiers for complex waveform up converter paths Drivers in linearized transmit systems Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Required Unlike competing products, Mini-Circuits PHA-202+ provides Input and Output Return Loss of over 15 dB up to 2 GHz without the need for any external matching components PHA-202+


• High IP3, 46.1 dBm typ. at 1 GHz • Gain, 17.0 dB typ. at 1 GHz • High Pout, P1dB 30.4 dBm typ. at 1 GHz • No external matching components required

Related Products

Other products of interest



Mini-Circuits MTX2-73-D+ is a wideband MMIC balun transformer die with an impedance ratio of 2:1 covering a wide range of

Read More »


Product Overview The FL141 Series Flexible Coaxial Cables are ideal for interconnection of coaxial components or sub-systems. The construction includes

Read More »


Product Overview Mini-Circuits ZPUL-30P+ utilizes high power LDMOS transistor output stage. Class A operation accept any kind of modulation. The

Read More »


TSY-172LNB-D+ (RoHS compliant) is an advanced Low Voltage, Low Current, Low Noise wideband By- pass amplifier Die fabricated using GaAs

Read More »


Product Overview The ULP-176+ is a lowpass filter in a top hat package (size of 0.25″ x 0.25″) fabricated using

Read More »

Not sure which model you need?