fbpx

LFCG-2850+

Ceramic Low Pass Filter

Ceramic Low Pass Filter • DC to 2850 MHz • Very good rejection, 45 dB typical • Rugged, ceramic construction • Tiny size, 0.079 x 0.049 x 0.037” (0805) • Excellent power handling, 6.5W

Features

Ceramic Low Pass Filter • DC to 2850 MHz • Very good rejection, 45 dB typical • Rugged, ceramic construction • Tiny size, 0.079 x 0.049 x 0.037” (0805) • Excellent power handling, 6.5W

Related Products

  • List Item #1
  • List Item #2
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3
  • List Item #3

Other products of interest

Amplifiers

ZX60-112LN+

Product Overview Mini-Circuits’ ZX60-112LN+ is a wideband, low noise connectorized amplifier providing a unique combina- tion of low noise figure, high gain, high IP3, and high reverse isolation, supporting a wide range of sensi- tive receiver applications. This design operates on a single 5V supply and comes in a rugged,

Read More »
Switches

JSW2-63VHDRG+

Product Overview JSW3-272DR+ is a reflective SP3T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator. Its tiny 2x2mm, 14-lead case enables wideband performance in tight spaces and dense PCB

Read More »
Adapters

KM-24F+

Product Overview Mini-Circuits’ KM-24F+ is a coaxial 2.4 mm-F to 2.92 mm-M adapter supporting a wide range of applica- tions from DC to 40 GHz. This model provides excellent VSWR, low insertion loss, and flat response versus frequency. The KM-24F+ features passivated stainless steel construction and measures only 0.85″ (l)

Read More »
Amplifiers

VEQY-8-63+

Product Overview Mini-Circuits’ VEQY-8-63+ is an absorptive Gain Equalizer fabricated using highly repetitive GaAs IPD* MMIC process incorporating resistors, capacitors and inductors having negative insertion loss slope. VEQY-8-63+ has a nominal attenuation slope of 8 dB. Feature Advantages Negative Insertion Loss Slope vs. Frequency Useful for compensating negative gain slope

Read More »
Amplifiers

GALI-39-D+

• Wideband Monolithic Amplifier Die • DC to 7 GHz • Output power, 10.5 dBm typ. • High Gain, 19.7 dB at 2 GHz

Read More »

not sure which model you need?