|
|
|
|
|
|
|
|
|
This week I have selected for you 4 Mini-Circuits products for you to discover.
|
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
|
|
|
SMT MMIC, Low Noise Amplifier
10 MHz to 2000 MHz, 50Ω
|
|
The TSS-23ULN+ is a pHEMT-based wideband, ultra-low noise MMIC amplifier with high P1dB, high IP3, and voltage-controlled shutdown capability. Operating from 10 to 2000 MHz, this amplifier features typical 0.4 dB noise figure, 20 dB gain, +20.3 dBm P1dB, and +37.3 dBm OIP3. This combination of characteristics makes it ideal for sensitive receiver applications. TSS-23ULN+ operates on a single +5 …
|
|
|
|
|
|
|
|
LTCC Band Pass Filter
2400 - 2550 MHz, 50Ω
|
|
VBF-2450+ is a 50Ω bandpass filter built in rugged unibody construction. Covering 2400-2550 MHz bandwidth, these units offer good matching within the passband and good rejection in stopband. VBF-2450+ offer good insertion loss, and excellent power handling capability. It handles up to 2W RF input power and provides a wide operating temperature range from -40°C to +85°C.
|
|
|
|
|
|
|
|
TERMINATION SMA-M 2W RoHS
|
|
Mini-Circuits’ TERM-2W-183S+ is a wideband 50Ω high power termination capable of absorbing signals up to 2 W from DC to 18 GHz. It provides excellent return loss across its entire operating frequency range, effectively dissipating signal power with minimal reflections. This model has an SMA-Male connector, allowing connections with SMA-Female connectors. The unit features rugged construction for a long life …
|
|
|
|
|
|
|
|
TORQUE WRENCH 1.0 MM-Type/6MM/4IN.LB
|
|
Categories: Test Accessories
|
Mini-Circuits’ Precise Break-over Torque Wrench TRQ-10-06 allows for precise mating force and ease of use in tight spaces. The head will break over to signal the user when the preset torque value is achieved. It will effectively prevent over/under tightening. Groove at end of handle marks position in which to hold wrench. Please see app note AN-71-001 for instructions on …
|
|
|
|
|
|
|
|
SENIOR RF Engineer (MANAGERIAL)
Mini-Circuits Israel #05-2025
Mini-Circuits Israel develops components and test equipment for the commercial market. We are looking for a motivated RF development engineer, to join our RF team. The candidate will design mixed signal units and will be responsible for the full lifecycle of the product – from concept, schematic, layout, testing stages until final production and will work closely also with the global organization.
|
Location: Kiryat Bialik (North Israel)
On-site full-time position
|
- At least 8 years’ experience in RF and microwave design.
- Hands on experience in lineups, schematic and layout design of high frequency mixed signal boards (above 20Ghz – an advantage).
- Experience in RF simulations: 2D (ADS or similar) and 3D (HFSS or CST)
- Experience in RF and microwave testing equipment (VNA, spectrum analyzer, power meters etc).
- Experience in digital HW (microcontrollers and FPGAs) – an advantage.
- Good communication skills, teamwork, and self-learning and managerial skills.
- BSc in Electrical engineering (MSC and advantage).
|
|
|
Want to recomment this job to a friend? Just go to our jobs page and click the Email button.
|
|
|
|
|
|
|
|
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
Tel: 03-5406052
Mobile: 054-4999216
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
|
