|
|
|
|
|
|
|
This week I have selected 5 Mini-Circuits products and a new article: "Phase-Matched Cable Assemblies".
|
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
|
|
|
|
|
|
Phase-matched cable assemblies are ubiquitous, and modern-day phase matching requirements serve to drive their growing popularity. As electrical length matching requirements have tightened to less than one or two degrees, the mechanical precision with which various styles of cable are constructed has improved to keep pace. Additionally, dielectrics more exotic than tried-and-true Teflon are being researched and introduced to afford greater phase stability. Volumes have been written on how to phase-match cable assemblies and dozens and dozens of companies practice this discipline. Why is phase-matching so prevalent, and why does it matter so much? In this article we answer these questions by highlighting many phase-matched cable applications and the effect of varying phase length on systems in the RF/microwave domain. We also describe Mini-Circuits’ capabilities in the phase-matching cable arena.
|
|
|
|
|
|
|
|
|
|
SMT MMIC, Medium Power Driver Amplifier
5.6 to 11.7 GHz, 50Ω, 4x4 mm QFN Style Package
|
|
The AVA-6123MP+ is a GaAs MMIC multi-stage medium power driver amplifier operating from 5.6 to 11.7 GHz. The amplifier is biased at +5 V and 140 mA quiescent current providing 22.4 dB of Linear Gain and +23.2 dBm of Saturated Output Power. The device is internally DC-blocked, and a DC path to ground is present at the RF input and …
|
|
|
|
|
|
|
|
Connectorized SMA Female, Medium Power Amplifier
16 to 21 GHz, 50Ω
|
|
Mini-Circuits’ ZX60-16213+ is a medium power connectorized amplifier, providing a unique combination of medium output power and high output IP3. It supports a wide range of applications and many systems where high linearity is needed. This design operates on a single positive and single negative supply, and comes in a rugged, compact unibody case (1.2” x 0.75” x 0.46”) with …
|
|
|
|
|
|
|
|
Lumped LC Band Pass Filter
150 - 350 MHz, 50Ω
|
|
Mini-Circuits’ Model-BPF-BY250+ is a Lumped LC filter that offer a good insertion loss and high rejection. This bandpass filter covers from 150 to 350MHz. This filter has high Q capacitors and inductors to achieve a low insertion loss. It has repeatable performance across production lots.
|
|
|
|
|
|
|
|
USB/Ethernet Smart Power Sensor
50 MHz - 9 GHz, -60 to +20 dBm
|
|
Mini-Circuits’ PWR-9PWHS-RC peak & average power sensor operates from 50 to 9000 MHz with an industry leading measurement range down to -40 dBm in peak mode and -60 dBm in average mode. The 80 Msps sample rate with internal buffer enables up to 120k complete measurements per second. With up to 30 MHz video bandwidth, complex analysis and profiling of …
|
|
|
|
|
|
|
|
1:2 MMIC Transformer
2 - 18 GHz, 50Ω
|
|
Mini-Circuits MTX2-183+ is a wideband MMIC balun transformer with an impedance ratio of 1:2 applicable for a wide range of applications from 2 to 18 GHz. Fabricated using GaAs process technology. The MMIC provides outstanding repeatability with low insertion loss, low amplitude unbalance, low phase unbalance, and excellent common mode rejection.
|
|
|
|
|
|
|
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
|
