Share this emailCopy the public link or share it on your favorite channel.
MCDI, Mini-Circuits Exclusive Representative In Israel
Adapters | Amplifiers | Attenuators | Bias Tees | Cables | Couplers | DC Blocks | Equalizers | Filters | Frequency Mixers | Frequency Multipliers | Impedance Matching Pads | Limiters | Modulators/Demodulators | Oscillators | Phase Detectors | Phase Shifters | Power Detectors | Power Splitters/Combiners | 90°/180° Hybrids | RF Chokes | Switches | Synthesizers | Terminations | Transformers & Baluns | Waveguides | High Power Test Systems | Instrumentation Amplifiers | Modular Test Systems | Mechanical Switch Matrices | Mesh Network Test Systems | NxM Switch Matrices | Panel Mounted Structures | Programmable Attenuators | Signal Distribution Systems | Signal Generation And Measurement | Solid State Switch Systems | Test Accessories | Custom Test Systems | RF Energy
Mini-Circuits Power Sensors
Dear reader,

This week I have selected for you 5 Mini-Circuits products for you to discover. We also have a new position for a Senior RF Engineer at Mini-Circuits Israel (Kyriat Bialik). Please check it out and do not hesitate to recommend it to your friends.

I hope you will enjoy the read and look forward to be of further assistance to you.

As always, please feel free to contact us with any questions you may have.

Aharon

NEW POSITION AVAILABLE

SENIOR RF Engineer (MANAGERIAL)
Mini-Circuits Israel #05-2025


Mini-Circuits Israel develops components and test equipment for the commercial market. We are looking for a motivated RF development engineer, to join our RF team. The candidate will design mixed signal units and will be responsible for the full lifecycle of the product – from concept, schematic, layout, testing stages until final production and will work closely also with the global organization.

Location: Kiryat Bialik (North Israel)


On-site full-time position

Job requirements:
  • At least 8 years’ experience in RF and microwave design.
  • Hands on experience in lineups, schematic and layout design of high frequency mixed signal boards (above 20Ghz – an advantage).
  • Experience in RF simulations: 2D (ADS or similar) and 3D (HFSS or CST)
  • Experience in RF and microwave testing equipment (VNA, spectrum analyzer, power meters etc).
  • Experience in digital HW (microcontrollers and FPGAs) – an advantage.
  • Good communication skills, teamwork, and self-learning and managerial skills.
  • BSc in Electrical engineering (MSC and advantage).

Want to recomment this job to a friend? Just go to our jobs page and click the Email button.

AVA-223MP+

SMT MMIC, Medium Power, pHEMT Amplifier

100 kHz to 22 GHz, 50Ω, 5x5 mm QFN Style Package

AVA-223MP+
Categories: Amplifiers

Mini-Circuits’ AVA-223MP+ is a wideband, high dynamic range, MMIC amplifier fabricated on a GaAs pHEMT process with high output power and broadband gain. Operating from 100 kHz to 22 GHz, this amplifier features typical +26 dBm P1dB, +27.2 dBm PSAT, 3 dB NF, and +38.2 dBm OIP3. The AVA-223MP+ comes in an industry standard 5x5 mm 32-Lead QFN-style package for …

Continue reading

ABF-8G+

Thin Film SMT Band Pass Filter

6200 - 9800 MHz, 50Ω

ABF-8G+
Categories: Filters

Mini-Circuits’ Surface Mount Thin-Film filters offer low insertion loss and high rejection realized via Thin-Film on Alumina substrate, using a sputtering process that can guarantee an enhanced Q and repeatable performance. Low pass, high pass, and bandpass surface mount thin-film designs can be realized with this technology up to 40 GHz in a small form factor helping customers achieve their …

Continue reading

ZXF90-3-443-K+

3X Multiplier

Output Freq 20 to 43.5 GHz

ZXF90-3-443-K+
Categories: Multipliers

Mini-Circuits’ ZXF90-3-443-K+ is a wideband frequency tripler utilizing MCLs’ own GaAs HBT multiplier, CY3-453-DG+, converting input frequencies from 6.66 to 14.5 GHz into output frequencies from 20 to 43.5 GHz. Its wide output range makes this model suitable for broadband systems, as well as a wide variety of narrow-band applications. This multiplier is housed in a rugged, small form factor …

Continue reading

GP2S1A+

2 Ways MMIC SMT DC Pass Power Splitter

500 - 2500 MHz, 50Ω

GP2S1A+
Categories: Power Splitters/RF Power Combiners

Mini-Circuits’ GP2S1A+ is a 50Ω GaAs MMIC 2-way splitter/combiner that operates from 500 to 2500 MHz. The GP2S1A+ provides typical performance of 1.0 dB insertion loss, 22 dB isolation, 0.02 dB amplitude unbalance, and 0.4 deg phase unbalance. In conjunction, it has excellent power handling capabilities of 10 W max, with the ability to pass DC current up to 370 …

Continue reading

SSG-8N12GD-RC

8 to 12.5 GHz Signal Generator

(-55 dBm to +23 dBm)

SSG-8N12GD-RC
Categories: Signal Generators

Mini-Circuits’ SSG-8N12GD-RC is a dual-channel wide-band signal generator operating from 8 to 12.5 GHz. With up to +23 dBm typical output power, it is an ideal signal source for characterization of millimeter wave components and systems at high power. Configure CW / single-tone outputs, flexible pulse sequences, AM, FM and Chirp modulations, or automated frequency / power sweep & hop …

Continue reading

GET ENGINEERING SUPPORT

Aharon
Aharon Sagiv
FAE Technical Manager
Tel: 03-7988118
Mobile: 054-4600801
ilan2022a
Ilan Strusman
FAE
Tel: 03-6736696
Mobile: 054-2008813

Our Engineering Team is here to help you!

MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
MCDI, Mini-Circuits Exclusive Representative In Israel
custom website custom linkedin 
Unsubscribe | Manage your subscription