|
|
|
|
|
|
|
|
|
This week I have selected for you 4 Mini-Circuits products for you to discover.
|
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
|
|
|
Die RF Medium Power pHEMT Amplifier
17 - 31.5 GHz, 50Ω
|
|
The AVA-17303-D+ is a GaAs MMIC Medium Power Amplifier operating from 17 to 31.5 GHz. This amplifier provides typical 19.2 dB of gain, +23.8 dBm P1dB, and +36 dBm OIP3 while operating from a +6 V power supply at 160 mA. The device is matched to 50Ω and comes as a die suitable for chip and wire assemblies. These characteristics …
|
|
|
|
|
|
|
|
LTCC SMT High Pass Filter
3 - 11 GHz
|
|
Mini-Circuits’ HFHK-2700+ is a miniature low temperature co-fired ceramic (LTCC) high pass filter with a 3000 to 11000 MHz passband that supports a variety of applications. This model provides 0.8 dB typical insertion loss over a wide band due to its rugged monolithic construction. Housed in a small 1008 ceramic form factor, the filter is ideal for dense signal chain …
|
|
|
|
|
|
|
|
LTCC SMT High Pass Filter
4.25 - 14 GHz
|
|
Mini-Circuits’ HFHK-3800+ is a miniature low temperature co-fired ceramic (LTCC) high pass filter with a 4250 to 14000 MHz passband that supports a variety of applications. This model provides 1 dB typical insertion loss over a wide band due to its rugged monolithic construction. Housed in a small 1008 ceramic form factor, the filter is ideal for dense signal chain …
|
|
|
|
|
|
|
|
2 Ways MMIC SMT DC Pass Power Splitter
800 - 2100 MHz, 50Ω
|
|
Categories: Power Splitters/RF Power Combiners
|
Mini-Circuits’ GP2SA+ is a 50Ω GaAs MMIC 2-way splitter/combiner that operates from 800 to 2100 MHz. The GP2SA+ provides typical performance of 1.0 dB insertion loss, 22 dB isolation, 0.02 dB amplitude unbalance, and 0.4 deg phase unbalance. In conjunction, it has excellent power handling capabilities of 10 W max, with the ability to pass DC current up to 370 …
|
|
|
|
|
|
|
|
SENIOR RF Engineer (MANAGERIAL)
Mini-Circuits Israel #05-2025
Mini-Circuits Israel develops components and test equipment for the commercial market. We are looking for a motivated RF development engineer, to join our RF team. The candidate will design mixed signal units and will be responsible for the full lifecycle of the product – from concept, schematic, layout, testing stages until final production and will work closely also with the global organization.
|
Location: Kiryat Bialik (North Israel)
On-site full-time position
|
- At least 8 years’ experience in RF and microwave design.
- Hands on experience in lineups, schematic and layout design of high frequency mixed signal boards (above 20Ghz – an advantage).
- Experience in RF simulations: 2D (ADS or similar) and 3D (HFSS or CST)
- Experience in RF and microwave testing equipment (VNA, spectrum analyzer, power meters etc).
- Experience in digital HW (microcontrollers and FPGAs) – an advantage.
- Good communication skills, teamwork, and self-learning and managerial skills.
- BSc in Electrical engineering (MSC and advantage).
|
|
|
Want to recomment this job to a friend? Just go to our jobs page and click the Email button.
|
|
|
|
|
|
|
|
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
Tel: 03-5406052
Mobile: 054-4999216
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
|
