Share this emailCopy the public link or share it on your favorite channel.
MCDI, Mini-Circuits Exclusive Representative In Israel
Adapters | Amplifiers | Attenuators | Bias Tees | Cables | Couplers | DC Blocks | Equalizers | Filters | Frequency Mixers | Frequency Multipliers | Impedance Matching Pads | Limiters | Modulators/Demodulators | Oscillators | Phase Detectors | Phase Shifters | Power Detectors | Power Splitters/Combiners | 90°/180° Hybrids | RF Chokes | Switches | Synthesizers | Terminations | Transformers & Baluns | Waveguides | High Power Test Systems | Instrumentation Amplifiers | Modular Test Systems | Mechanical Switch Matrices | Mesh Network Test Systems | NxM Switch Matrices | Panel Mounted Structures | Programmable Attenuators | Signal Distribution Systems | Signal Generation And Measurement | Solid State Switch Systems | Test Accessories | Custom Test Systems | RF Energy
Dear reader,

This week I have selected for you a new article "The Anti-Parallel Series Pair Limiter Topology" and 4 Mini-Circuits products for you to discover.

I hope you will enjoy the read and look forward to be of further assistance to you.

As always, please feel free to contact us with any questions you may have.

Aharon

Need Engineering support?
Contact our engineers to fast track your projects

The Anti-Parallel Series Pair Limiter Topology

Categories: All, Limiters

The PIN diode itself was invented by Jun-ichi Nishizawa in 19501, just 18 days before R. N. Hall of General Electric. Hall would go on to propose the PIN diode as a rectifier in 19522, and a decade later the anti-parallel PIN diode limiter configuration had essentially become mainstream and was not presented as anything novel.

For more than 6 decades PIN diode limiters have served to enhance the robustness of RF receivers. The anti-parallel configuration is a very popular choice because its insertion loss, recovery time, power handling, flat leakage and frequency response characteristics can be traded off readily by choice of PIN diode. Even increasing the number of PIN diodes utilized in a limiter circuit can affect performance whether they are added in series or in subsequent stages altogether.

Continue reading

WR22-ATT-3+

WR22 to WR22 Flange Waveguide 3 dB Attenuator Straight

33 - 50 GHz

WR22-ATT-3+
Categories: Attenuators

The Mini-Circuits catalog model WR22-ATT-3+ is a precision fixed 3 dB 500 mW attenuator. WR22-ATT-3+ operates over an extremely wide frequency range with excellent VSWR and supports a broad range of system and testing applications. Precise performance, excellent VSWR and wide bandwidth make this model an ideal solution for systems requiring accurate attenuation across a very wide frequency range.

Continue reading

RBDC9-182-75R+

9 dB SMT Bi-Directional Coupler

5 - 1800 MHz, 75Ω

RBDC9-182-75R+
Categories: Couplers

Mini-Circuits’ RBDC9-182-75R+ surface-mount bi-directional coupler provides 9 dB coupling with low mainline loss, high isolation between In-CPLR ports, and good return loss for 75 ohms applications from 5 to 1800 MHz, supporting a variety of broadband applications including DOCSIS® 4.0 systems and equipment. This model features core and wire construction and is good for solderability and easy visual inspection.

Continue reading

Engineering Support That Helps You Move Faster

From RF measurements to complete automated test systems, MCDI provides the technologies and expertise engineers rely on.

MCDI, Mini-Circuits’ Exclusive Representative and Distributor in Israel, delivers premium RF technologies and engineering expertise to help companies accelerate validation, improve measurements, and deploy advanced systems faster.

Discover our complete test and measurement solutions

LFCW-482+

LTCC Surface Mount Low Pass Filter

DC to 4.8 GHz, 50Ω

LFCW-482+
Categories: Filters

Mini-Circuits’ LFCW-482+ is a high-performance low pass filter designed for operation from DC to 4800 MHz. Utilizing low temperature co-fired ceramic (LTCC) technology, the filter delivers excellent insertion loss, return loss and stopband attenuation in a compact 0603 surface-mount package. With a typical insertion loss of as low as 0.4 dB and strong rejection beyond the cutoff band, this filter …

Continue reading

RCMX-2SP4T-E53

Mechanical Switch Assembly, 2 x SP4T

DC – 52.5 GHz, 2.4 mm

RCMX-2SP4T-E53
Categories: Switch Matrices

Mini-Circuits’ RCMX-2SP4T-E53 contains a pair of electro-mechanical SP4T switches operating over a wide bandwidth from DC to 52.5 GHz with high isolation and low insertion loss. Each absorptive switch is fail-safe / normally open with a break before make configuration and typical lifetime of 2 million switching cycles when used within the noted specifications. The switches are housed in a …

Continue reading

GET ENGINEERING SUPPORT

Aharon Sagiv

FAE Technical Manager
Tel: 03-7988118
Mobile: 054-4600801
Teams Meeting

Ilan Strusman

FAE
Tel: 03-6736696
Mobile: 054-2008813
Teams Meeting

Leeron Yacoby

FAE
Tel: 03-5406052
Mobile: 054-4999216
Teams Meeting

Our Engineering Team is here to help you!

MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
MCDI, Mini-Circuits Exclusive Representative In Israel
custom website custom linkedin 
Unsubscribe | Manage your subscription