|
|
|
|
|
|
|
|
|
Engineering Support That Helps You Move Faster
From RF measurements to complete automated test systems, MCDI provides the technologies and expertise engineers rely on.
|
MCDI, Mini-Circuits’ Exclusive Representative and Distributor in Israel, delivers premium RF technologies and engineering expertise to help companies accelerate validation, improve measurements, and deploy advanced systems faster.
|
|
|
|
|
|
|
This week I have selected for you 4 Mini-Circuits products and a new article "SATCOM Shifts Reference Frequency from 10 to 100 MHz – A System Perspective" for you to discover.
|
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
|
|
|
Categories: Bias-tee\Diplexer
|
Over the last decade, the satellite communications (SATCOM) industry has been evolving to support both wider channel bandwidths (BWs) and higher-order modulations such as higher-order quadrature amplitude modulation (QAM). While wider BW naturally enables more data throughput, higher-order QAM packs more bits into each symbol while utilizing the same BW. A wider BW will introduce more noise and consequently degrade system bit error rate (BER) performance by degrading the signal-to-noise ratio (SNR). The increasing constellation density of higher-order QAM raises its sensitivity to phase jitter, which will also degrade the system BER if lower system phase noise is not first achieved. To achieve higher data throughput by correspondingly reducing system phase noise, many in the SATCOM industry have been moving the reference frequency of their distribution clocks and subsystem timing architectures away from the long-standing 10 MHz reference and toward higher-frequency references such as 100 MHz. Mini-Circuits supports this migration path with our line of bias-tee/diplexers that are ideal for SATCOM installations. Case in point, the Z4BT-2R15GW+ affords the ability to inject a 100 MHz reference and includes a bias-tee as well as wideband RF throughput.
|
|
|
|
|
|
|
|
RF Adapter Right Angle 2.92mm Male to 3.5mm Male
DC - 33GHz 50Ω
|
|
Mini-Circuits’ KMR-35M+ is a coaxial 2.92 mm Right-Angle Male to 3.5 mm Male adapter supporting a wide range of applications from DC to 33 GHz. This model provides excellent VSWR and low insertion loss versus frequency. The KMR-35M+ features passivated stainless-steel construction and measures only 0.708” in length.
|
|
|
|
|
|
|
|
SMT MMIC, Linear, Gain Block, HBT Amplifier
DC to 7000 MHz, 50Ω, 1.5x1.5 mm QFN Style Package
|
|
The LEE1-39+ is high-linearity gain block amplifier in a low-cost surface mount package, fabricated using an InGaP/GaAs HBT semiconductor process. Operating from DC to 7000 MHz, this amplifier features high dynamic range with typical 2.3 dB noise figure, 18.4 dB gain, +11.9 dBm P1dB, and +22.3 dBm OIP3 at 4 GHz. This combination of performance makes it ideal for sensitive, …
|
|
|
|
|
|
|
|
WR19 to WR19 Flange Waveguide
20 dB Attenuator Straight 40 - 60 GHz
|
|
The Mini-Circuits catalog model WR19-ATT-20+ is a precision fixed 20 dB 500 mW attenuator. WR19-ATT-20+ operates over an extremely wide frequency range with excellent VSWR and supports a broad range of system and testing applications. Precise performance, excellent VSWR and wide bandwidth make this model an ideal solution for systems requiring accurate attenuation across a very wide frequency range.
|
|
|
|
|
|
|
|
Ceramic Resonator Band Pass Filter
1030 - 1090 MHz, 50Ω
|
|
All our Surface Mount Ceramic Resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Excellent repeatability across units is achieved through precise tuning and process control.
|
|
|
|
|
|
|
|
|
Aharon Sagiv
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Ilan Strusman
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
Leeron Yacoby
Tel: 03-5406052
Mobile: 054-4999216
|
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
|
