|
|
|
|
|
|
|
This week I have selected 5 Mini-Circuits products for you to discover.
|
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
|
|
|
|
LTCC SMT THRU-LINE
DC - 30 GHz, 50Ω
|
|
Mini-Circuits’ TPHKI-3002+ is a miniature low-temperature co-fired ceramic (LTCC) 50-Ohm transmission line with a low insertion loss of 1.3 dB typical up to 30 GHz. This can be used as a placeholder in system boards in the absence of LTCC Filters of the same case style, NM3237.
|
|
|
|
|
|
|
|
31.5 dB Programmable Attenuator
100 MHz - 44 GHz
|
|
Categories: Programmable Attenuators
|
Mini-Circuits’ RCDAT-44G-30 is a precision programmable attenuator covering an extremely wide bandwidth, from 0.1 to 44 GHz. Its unique design allows attenuation settings to be programmed from 0 to 31.5 dB, in 0.5 dB steps with monotonic attenuation change per dB, even at the highest frequencies and attenuation settings. The attenuator can be controlled via USB or Ethernet, allowing control …
|
|
|
|
|
|
|
|
Splitter / Combiner Panel
1 x 16-Way, 0.6 - 6 GHz, 1U, SMA
|
|
Categories: Power Splitters/RF Power Combiners
|
Mini-Circuits panel-mounted structures provide clean, organized management of cable runs and connections in complex, highvolume test setups. Multiple connector adapters, power splitters, directional couplers, and other essential RF components and test accessories can be integrated efficiently within the test system. Custom configurations are available upon request. ZT-394 is a rack-mounted 16-way splitter/combiner requiring only 1U of rack space. The wide …
|
|
|
|
|
|
|
|
Programmable Attenuator
4-Channel, 0.1 - 18 GHz, 0-63dB, 1U, SMA
|
|
Categories: Programmable Attenuators
|
Mini-Circuits’ ZTDAT series multi-channel programmable attenuator systems are ideal for a wide range of signal level control applications including transmission loss simulation, signal fading and MIMO measurements. ZTDAT-4-18G63S operates from 100 MHz to 18 GHz with typically greater than 95 dB isolation between 4 bi-directional attenuator channels. Each channel can be independently controlled from 0 to 63 dB attenuation with …
|
|
|
|
|
|
|
|
Ceramic RF Transformer
50Ω, 4600 to 5900 MHz, 1:2 Ratio
|
|
Mini-Circuits' TCO2-532+ is a tiny ceramic RF balun transformer with an impedance ratio of 1:2, cover- ing a variety of wireless communications applications from 4600 to 5900 MHz. This model provides low insertion loss, low phase unbalance (relative to 180°), low amplitude unbalance, and RF input power handling up to 2W. Fabricated using LTCC technology, the unit comes housed in …
|
|
|
|
|
|
|
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
Tel: 03-5406052
Mobile: 054-4999216
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
|
