|
|
|
|
|
Dear reader, this week I have selected for your review a new LTCC low pass filter designer's kit, and four additional new products . I hope you will enjoy the read and look forward to be of further assistance to you. As always, please feel free to contact me with any questions you may have.
|
|
|
|
|
|
|
|
|
Our new LTCC low pass filter designer's kit feates ten different models and is ideal for the evaluation of parts for Wi-Fi, Bluetooth and Zigbee applications.
|
|
|
|
|
|
|
|
|
|
SUPER WIDEBAND, LOW NOISE Monolithic Amplifier Die
2000 - 30000 MHz, 50Ω
|
|
|
AVA-0233LN-D+ is a GaAs, pHEMT, MMIC Distributed Amplifier Die that operates from 2 to 30GHz. The amplifier typically provides 16.8dB Gain and 2.0dB Noise Figure, 14dBm Output Power at 1dB Gain Compression, 25.7dBm OIP3. The amplifier is well-matched to 50Ohm at both input and output. AVA-0223LN-D+ is a self-biased single positive supply device with VDD = 5V and IDD = …
|
|
|
|
|
|
USB / Ethernet Programmable Attenuator
50Ω, 0 – 120 dB, 0.05 dB step, 200 to 8000 MHz
|
|
|
Categories: Programmable Attenuators
|
Mini-Circuits' RC4DAT-8G-120H is a 4-channel programmable attenuator suitable for a wide range of signal level control applications from 200 MHz to 8 GHz. Each independently controlled channel provides 0 to 120 dB attenuation in 0.05 dB steps. Its unique design maintains linear attenuation change per dB, even at the highest attenuation settings. The attenuator can be controlled via USB or …
|
|
|
|
|
|
|
|
Flexible Coaxial Cable
50Ω, 6 inch, DC to 40 GHz
|
|
|
The FL47-6KMVM+ is ideal for interconnection of coaxial components or sub-systems. The construction includes a silver-plated copper center conductor. The outer shield is silver plated copper braid, which minimizes signal leakage and at the same time flexible for easy bend. Dielectric is low loss FEP. Connectors have passivated stainless-steel coupling nut over a gold plated connector body with gold plated …
|
|
|
|
|
|
|
|
Wideband, DC Pass Directional Coupler
50Ω, 20dB, Up to 16W, 18 to 44 GHz
|
|
|
The Mini-Circuits' ZCDC20-V18443+ wideband directional coupler offers exceptional performance operat- ing over 18 to 44 GHz. This coupler has excellent coupling flatness, good directivity, and power handling. It is ideal for lab testing applications as well as for power monitoring over wide bands, among other applications.
|
|
|
|
|
|
|
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
Tel: 03-5406052
Mobile: 054-4999216
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
WaveSpace Episode 10 Mitigating Phase Noise Measurement Interference
|
|
|
|
|
|
|
|
|
