MCDI, Mini-Circuits Exclusive Representative In Israel
custom website custom 
MCDI - Mini-Circuits Exclusive Representative in Israel

Dear reader,

This week I have selected for you to discover:
  • New article: Linearity – Cascaded P1dB and IP3 for a Simple Microwave Front-End
  • 5 Mini-Circuits products
I hope you will enjoy the read and look forward to be of further assistance to you.

As always, please feel free to contact us with any questions you may have.

Aharon

IMPORTANT ANNOUCEMENT:
Please be aware that Mini-Circuits will be closed from December 24, 2022, to January 3, 2023.
Please plan your orders ahead of time if you want them to be delivered in 2022. Mini-Circuits will stop taking orders and sending packages on December 21, 2022.

NEW ARTICLE

Linearity – Cascaded P1dB and IP3 for a Simple Microwave Front-End

Linearity – Cascaded P1dB and IP3 for a Simple Microwave Front-End
Categories: Amplifiers, Attenuators, Filters

When examining a device data sheet, linearity parameters P1dB and IP3 are straightforward and relatively easy to apply during the design process. Once several components are connected in series in a design, complex equations governing cascaded P1dB and IP3 must be utilized to determine the overall linearity performance of the system or subsystem. The equations utilized to compute P1dB and IP3 provide a means of achieving accurate results in the absence of expensive simulation software. Even though the effect of VSWR interactions between stages is not included when performing the calculations, the results are a good first order approximation of the cascaded performance of the system. The purpose of this application note is to review P1dB and IP3 in general, and to compute these parameters for a basic, three-component RF front end. Other application notes in this series will delve further into the cascading of P1dB and IP3 as the system includes additional nonlinear components such as those utilized in frequency conversion and the accompanying IF components.

Continue Reading
Filters

FILTERS

K1-HFCG+

DESIGNER’S KIT High Pass Filters

50Ω 1400 to 18500 MHz

K1-HFCG+
Categories: Filters

Continue Reading

LFCN-2290-2+

LTCC Low Pass Filter

DC - 2290 MHz, 50Ω

LFCN-2290-2+
Categories: Filters

Mini-Circuits' LFCN-2290-2+ is an LTCC low pass filter with a passband from DC to 2290 MHz, sup- porting a variety of applications. This model provides 0.9 dB passband insertion loss, 29 dB stopband rejection from 3110 to 3500 MHz, and 40 dB rejection from 3500 to 8000 MHz. It handles up to 10W RF input power and provides a wide …

Continue Reading

POWER SENSORS

PWR-4GHS

Wide Dynamic Range USB Smart Power Sensor

50Ω, -30 dBm to +20 dBm, 9 kHz to 4000 MHz

PWR-4GHS
Categories: Power Sensor

Mini-Circuits’ PWR-4GHS is a low-cost compact sensor-head that turns any PC with a USB port into an average power meter for CW (continuous waveform) signals. The sensor has a 50 dB input dynamic range allowing measurement of RF powers down to -30 dBm, over 9 kHz to 4000 MHz. The USB HID interface is “plug & play” compatible, meaning no …

Continue Reading

SIGNAL GENERATORS

SSG-6001RC

SYNTHESIZER SIGNAL GENERATOR

50Ω, -50 dBm to +16 dBm, 10-15000 MHz

SSG-6001RC
Categories: Signal Generators

Mini-Circuits SSG-6001RC is a wideband synthesized signal generator operating over a frequency range of 1 to 6000 MHz. The signal generator is cased in a rugged metal shielded package (11" x 8.5" x 2.15") and equipped with an N-type 50 connector at the RF output port. Full software support is provided, including our user-friendly GUI application for Windows and a …

Continue Reading

PROGRAMMABLE ATTENUATORS

RC4DAT-6G-60

USB/Ethernet 4 Channel Programmable Attenuator

0-63 dB, 1 to 6000 MHz

RC4DAT-6G-60
Categories: Programmable Attenuators

Mini-Circuits’ RC4DAT-6G-60 is a 4-channel programmable attenuator suitable for a wide range of signal level control applications from 1 MHz to 6 GHz. Each independently controlled channel provides 0 to 63 dB attenuation in 0.25 dB steps with more than 100 dB isolation between channels. Its unique design maintains linear attenuation change per dB, even at the highest attenuation settings. …

Continue Reading

GET ENGINEERING SUPPORT

Aharon
Aharon Sagiv
FAE Technical Manager
Tel: 03-7988118
Mobile: 054-4600801
ilan2022a
Ilan Strusman
FAE
Tel: 03-6736696
Mobile: 054-2008813

Our Engineering Team is here to help you!

MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.

Mini-Circuits Israel is hiring


We have three great positions available to join our growing team.

If you know anyone that could be interested, we would appreciate you forwarding this. For your convenience, you may also share directly from our Career page.
Check the positions by clicking on one of the links below.

LATEST VIDEO

mq1

Upscreening RF / Microwave Components for Space | MCDI - Mini-Circuits - Israel


Mini-Circuits has over 30 years of experience supporting customers with screening requirements for space missions. From the earliest government missions to the newest commercial SmallSat constellations, our in-house capabilities offer the speed, flexibility, reliability, and cost-effectiveness to make your mission a success.


Language: English
Subtitles: English & Hebrew
MCDI, Mini-Circuits Exclusive Representative In Israel
custom website custom 
Unsubscribe | Manage your subscription