|
|
|
|
|
|
|
|
This week I have selected for you to discover:
|
- New article: RF/Microwave Bias Tees from Theory to Practice
- 5 Mini-Circuits products
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
MCDI continues to provide full-service despite the current situation, handling proposals, orders, and professional engineering support through all channels, including personal meetings.
|
Shipments
Most airlines have ceased their flights to Israel, the remaining available flights are prioritized for critical supplies, leading to a severe lack of available cargo space and delays. The delays are due to force majeure and we are doing our utmost best to minimize them as much as possible.
|
We recommend checking your current orders and expediting (where possible) your requested delivery dates. We are at your disposal to expedite shipments as much as possible to ensure their timely delivery. Contact us, and we will be happy to assist with any questions or concerns.
|
As always, we are here for you.
|
|
|
|
|
|
|
|
|
|
|
The bias tee is an essential component for applying DC voltage to any component that must also pass RF/microwave signals, most commonly an RF amplifier that requires a DC supply. For narrowband applications, bias tee design and construction are relatively straightforward, provided attention is paid to component self-resonant frequencies (SRFs). For broadband applications, however, bias tee design and construction are nontrivial, and attention to component characteristics is paramount to a successful, high-performance design. In this article, we examine narrowband bias tee design, component SRFs, and how they impact the design, then extend those ideas to broadband bias tees. We will also compare the electrical and physical performance attributes of different types of broadband bias tee designs including discrete circuits with conical inductors as well as MMICs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mini-Circuits LVA-273PN+ is an ultra-low phase noise distributed MMIC amplifier fabricated on a GaAs HBT process technology. Operating from 0.01 to 26.5GHz, this amplifier features high dynamic range and ultra-low phase noise along with 18dB gain, +18dBm P1dB, +28dBm OIP3, and 3.7dB noise figure. The LVA-273PN+ is ideal for use with low noise signal sources and highly sensitive transceiver signal …
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mini-Circuits' WVA-44603LNX+ is a wideband low noise amplifier, operating from 44 GHz to 60 GHz with a WR19 waveguide interface. The model operates over a positive supply range of +10 to +15 V, allowing users to choose their desired operating voltage. Internal DC-DC conversion circuitry maintains consistent efficiency over the full input voltage range. The amplifier incorporates several DC protection …
|
|
|
|
|
|
|
|
|
|
|
|
|
LTCC SMT Band Pass Filter
|
|
|
|
BFHKI-7851+ is a miniature low temperature co-fired ceramic (LTCC) ultra-high stopband rejection band pass filter with a 6.7 to 8.6GHz passband that supports a variety of applications. This model achieves 42dB typical stopband rejection up to 18.5GHz, when mounted on coplanar waveguide layouts. Housed in a small 4.95mm by 3.65mm ceramic form factor, the filter is ideal for dense signal …
|
|
|
|
|
|
|
|
|
|
|
Lumped LC Band Pass Filter
|
|
|
|
ZX75BP-188-S+ is a 50Ω bandpass filter in a connectorized package covering 138 to 238MHz. This offers good matching within the passband and high rejection in stopband.
|
|
|
|
|
|
|
|
|
|
|
USB/Ethernet RMS Power Sensor
|
|
50 MHz - 18 GHz, -60 to +20 dBm
|
|
|
|
Mini-Circuits’ PWR-18RMS-RC is a high-performance and cost-effective RMS power sensor for measurement of average power levels in a diverse range of test applications. The sensor operates from 50 MHz to 18 GHz, detecting input signals as high as +20 dBm and all the way down to -60 dBm. The compact package includes a rubberized outer case for protection and portability, …
|
|
|
|
|
|
|
|
|
|
|
Tel: 03-7988118
Mobile: 054-4600801
|
|
|
Tel: 03-6736696
Mobile: 054-2008813
|
|
|
|
Our Engineering Team is here to help you!
|
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|
