|
|
|
|
This week I have selected 5 Mini-Circuits products and a new professional article for you to discover.
|
I hope you will enjoy the read and look forward to be of further assistance to you.
|
As always, please feel free to contact us with any questions you may have.
|
|
|
|
|
|
|
MMIC Package Customization - Footprint-Compatible Solutions for Your System Obsolescence Management and EOL Part Replacement LTB (Last Time Buy) and EOL (End of Life) are among the most unwelcome acronyms in the ranks of Procurement and Engineering. Component obsolescence saddles customers with the burden of tying cash up in inventory on their balance sheet, or worse, redesigning their system around …
|
|
|
|
|
|
SMT Low Noise Amplifier
DC - 7 GHz, 50Ω
|
|
|
The PSA2-6+ is a wideband amplifier fabricated using GaAs HBT technology. This device offers +5.6 dBm P1dB, 15.2 dB gain, +17 dBm OIP3 and 2.4 dB NF making it ideal for use in communications applications, radar systems and broadband test and measurement equipment. It has repeatable performance from lot-to-lot and is packaged in a compact 1.85 x 2 mm 6-Lead, …
|
|
Low Noise Amplifier
4 - 18 GHz, 50Ω
|
|
|
Mini-Circuits’ ZX60-04183LN+ is a wideband low noise connectorized amplifier providing a unique combination of low noise, high IP3, and low current making it ideal for sensitive, high-dynamic-range receiver applications. This design operates on a single +5V supply and comes in a rugged, compact unibody case (0.74 x 0.75 x 0.46”) with SMA connectors, making it an excellent candidate for tough …
|
|
|
|
|
|
LTCC SMT High Pass Filter
19.5 - 35 GHz
|
|
|
Mini-Circuits’ HFCU-1882+ is a miniature low temperature co-fired ceramic (LTCC) high pass filter with a 19.5 to 35 GHz passband that supports a variety of applications. This model provides 2.1 dB typical insertion loss over a wide band due to its rugged monolithic construction. Housed in an 1812 ceramic form factor, this filter is ideal for dense signal chain PCB …
|
|
LTCC SMT Low Pass Filter
DC - 25 GHz, 50Ω
|
|
|
Mini-Circuits’ LFCV-2502+ is a miniature low-temperature co-fired ceramic (LTCC) low pass filter with a DC to 25 GHz passband that supports a variety of applications. This model provides 2.2 dB typical insertion loss over a wide band, due to its rugged monolithic construction. Housed in a small 1210 ceramic form factor, the filter is ideal for dense signal chain PCB …
|
|
|
|
|
|
|
Absorptive SP4T, Solid State Switch
0.1 - 18 GHz, 50Ω
|
|
|
Mini-Circuits’ TTL-1SP4T-183 is a fast switching SP4T featuring low loss and high isolation over a wide bandwidth. The switch has an absorptive configuration with internal terminations on ports J1 to J4. Simple control via TTL logic levels allows integration with a wide range of microcontroller, embedded or custom systems, without the communication delays associated with USB or Ethernet control. This …
|
|
|
|
|
|
Tel: 03-7988118 Mobile: 054-4600801
|
|
|
Tel: 03-6736696 Mobile: 054-2008813
|
|
|
Tel: 03-5406052 Mobile: 054-4999216
|
|
|
|
Our Engineering Team is here to help you!
MCDI, Mini-Circuits Exclusive Representative in Israel, hosts a professional team of Application Engineers with decades of experience. Our Engineers are here to assist with identifying the products that are just right for you, advise on correct setups and solutions. They are just a phone call or an email away and also will be delighted to meet you at your location throughout Israel. You may call them directly by clicking on their picture or visit our support page.
|
|
|
|
|
|